Checkmate Fleet Tracking Unit is installed in your vehicle, typically inside the dashboard or behind the radio. The GPS and RF antennas are hooked up to this box, as well as any PTO or event switches you would like to monitor. (Driver ID key not included with GO RF or GO Live units)

The GEOPORT wireless receiver is connected to your PC using a USB connection. This receiver collects tracking information from the fleet when the ignition is turned off within range.

This flat 4 inch radio antenna is used by the fleet tracking unit installed in the vehicle to transmit vehicle tracking data to the GEOPORT wireless receiver inside the office.

This GPS antenna is connected to the fleet tracking unit inside the vehicle to collect satellite radio signals to determine location and speed.

The Checkmate touch head is used with the Checkmate key to transfer data, ID drivers and update commands between the office computer and vehicle unit if not using the wireless capabilities. It is also used for programming vehicle units or retrieving vehicle accident data.

The GO Live Modem can be used to upgrade any passive unit to the new Real Time tracking platform. Now using the GPRS network nationwide GPS data can be available immediately while still containing all the great detailed tracking of our passive units.

The Checkmate System use it's own software that must be installed on your office PC. The software uses Microsoft Map Point for displaying tracking and zone information, as well as a database to store all your information permanently for use at any later time.